Tag archives for Data logger

GSM Based Temperature Data Logger with PIC Microcontroller – MikroC

image-169
In this project, The ambient Temperature is read every Hour then sent to a specified mobile phone number as SMS Text Messages. When the device is turned on, The GSM module is initialized, then the program goes into an endless loop. The Temperature is read, sent to a specified mobile phone number as an SMS Text Message, then the program wait for one hour before reading the next temperature value. The LM35 Precision Temperature sensor is used to read the ambient Temperature, the Telit GM862-QUAD GSM/GPRS module is used to send the SMS Text Messages. The project uses MikroC Pro for PIC Compiler

Interfacing SD Card (FAT32 System) With PIC Microcontroller – MikroC

image-1417
A memory card (also called a flash memory card) is a solid-state electronic data storage device used for storing digital information. They are commonly used in many electronic devices, including digital cameras, mobile phones, laptop computers, MP3 players and they are also widely used in data logging devices. The FAT32 library can be used for SD cards with more than 2GB of size, it lifts many constraints imposed by FAT16 file system. The key benefits is more addressable space(>2GB) and less wasted space due to smaller cluster size. This library is designed to simplify handling of the underlying hardware (SD/MMC cards), but also to be hardware independent. This library should work on any microcontroller with more than 1.5kB of RAM

Temperature Logger to SD Card with Menu Control – MikroC

image-180
An SD Card can be used to log data continuously over time for various purposes, this project shows the design of a temperature data logger with menu control system. The ambient temperature is read every minute and stored in a file on an SD card. When the program starts, the user is given three options: Saving the temperature readings to a new file on an SD card, Appending the temperature readings to an existing file or Sending all the saved file contents to a PC The user will have to choose one option and then press enter to start logging data. This menu only accessible once when the program starts, if the user wants to choose another option, he/she has to restart the program by pressing the reset button.