Home › Forums › Internet of Things Tutorial & Projects Discussions › Cooler pic18f45k22
- 21/05/2019 at 20:41 #5132
- 22/05/2019 at 00:24 #5134
And what exactly is that project doing?
by looking at a schematic you can’t guess what the project is doing.
Be specific as we can only assist you with specific issues of your project. You must first know what your project should do.
- 22/05/2019 at 21:42 #5136
In this project i want to read the temperature from the sensor and this temperature will be written on the LCD. Using the buttons I want to set a reference temperature. If the reading temperature of the sensor is higher than the reference temperature will start the engine.
- 22/05/2019 at 23:11 #5137
Same principle as in this project, follow the logic in this project: https://www.studentcompanion.co.za/automatic-temperature-control-system-using-pic-microcontroller-xc8/
- 23/05/2019 at 15:25 #5138
Sure, I saw, but it is the first project in MPLAB for me. It is difficult. I don’t know how to write the code for the up, down and set buttoms(for increase and decrease the reference temperature).
- 23/05/2019 at 20:24 #5139
You can use the code principle for the up, down and set buttons as explained in this project: https://www.studentcompanion.co.za/digital-clock-using-pic-microcontroller-and-the-ds1307-real-time-clock-xc8-compiler/
- 24/05/2019 at 01:44 #5140
Thanks, i will try.
- 24/05/2019 at 02:19 #5141
You must be logged in to reply to this topic.