Forum Replies Created
Can I use a different PIC18F series for this project: Automatic Temperature Control System? Instead of the PIC18F45K22?
Most of PIC18F or even PIC16F series can be used as long as they’ve got enough pins and memory.
Sir when I simulate this project, it shows the error “MCLR is low processor is in reset state”
What does that mean and how can I resolve it?
I want the hex file of Automatic Temperature Control System with mikroC project. (firstname.lastname@example.org) Please sir.
Good day. Can I use PIC16F877A as a microcntroller for this project?
I am an electronics engineering student and we usually use PIC16F877A.19/07/2017 at 09:37 in reply to: Can I use PIC16F877A as the microcontroller for Automatic Temperature Control ? #2469
Yes you can use PIC16F877A as a microcntroller. You’ll have to make some small modification for this project to work, like changing LAT register to PORT, removing the ANSELx with appropriate configuration19/07/2017 at 09:39 in reply to: Can I use PIC16F877A as the microcontroller for Automatic Temperature Control ? #2470
PIC16F877A does not have ANSEL registers. It will give you error messages if you use ANSELC = 0 or ANSELB=0. You can use ADCON1 instead if you want to configure these pins as digital pins as you can’t connect a keypad or relay to an analog input.19/07/2017 at 09:42 in reply to: MCLR is low processor in Automatic Temperature Control System #2471
It;s probably you did not connect the MCLR pin to positive supply voltage (+5v) as demonstrated on the circuit diagram on figure 2.19/07/2017 at 12:38 in reply to: MCLR is low processor in Automatic Temperature Control System #2474
It’s likely that you did not connect your MCLR pin to supply positive voltage (+5V).